Get your items quickly!  Shipped from Ontario, Canada!

RE-ARM is a 100Mhz, 32-bit ARM controller with the popular Arduino MEGA footprint. It's a plug-in replacement for the Arduino Mega in your RAMPS setup for a quick and easy upgrade to 32-bit goodness.

It runs the awesome Smoothieware firmware by Arthur Wolf.


What are the benefits of using Re-ARM?

  • More powerful processor. Faster feed rates!
  • Runs Smoothieware.
  • Easy configuration using a text file on SD card, no need to upload firmware every settings change
  • SD card appear as a drive in windows. Easy drag and drop new firmware or edit config file.
  • Capable of running smaller micro-step stepper drivers. Like the 1/128 micro-stepping SD6128 driver.
  • Available Ethernet RJ45 add-on Module
  • Run graphic LCDs with your Deltas without hiccups.
  • Run 2 SD cards, one for settings and firmware(on board) and the other for file loading (on LCD).
  • 5V tolerant pins, except for analog inputs which are at 3.3V
  • Filtered endstop inputs.
  • Able to run CNCs, Laser cutters and 3D printers.


Detailed Specs (running RAMPS)

  • 32-bit LPC1768 ARM processor
  • 100Mhz, 512kb Flash
  • mini B USB - Prototype photos shows USB B
  • 3.3V system voltage
  • 10-30V power supply input range, using Vin pin or barrel jack
  • 1 Heated bed, 2 Hotend Mosfet drivers
  • SD card slot for firmware upgrades and config file
  • 6 End stops, with filter and pull-ups
  • 3 thermistor inputs
  • Support SPI Displays like Viki2 and mini Viki(direct) and RRD Graphic LCD(adapter)
  • Support for I2C and parallel character LCDs using universal adapter by Jim Morris
  • Header breakout for Ethernet module (RJ45) daughter board.

Write a review

Note: HTML is not translated!
    Bad           Good

Re-ARM Controller for RAMPS with Ethernet

  • Brand: Panucatt
  • Product Code: TS-P-RE-ARM
  • Availability: In Stock
  • $69.99 CAD


Related Products

Arduino / Genuino Mega 2560 Rev3 (from arduino.cc)

Arduino / Genuino Mega 2560 Rev3 (from arduino.cc)

The Genuino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/ou..

$49.99 CAD

Genuine Pololu Stepper Motor Driver A4988 Black Edition (8-35V 2A)

Genuine Pololu Stepper Motor Driver A4988 Black Edition (8-35V 2A)

Our Black Edition A4988 stepper motor driver carrier is a higher-performance drop-in replacement for..

$11.99 CAD

Genuine Pololu Stepper Motor Driver DRV8825 Carrier (8.2-45V 2.2A)

Genuine Pololu Stepper Motor Driver DRV8825 Carrier (8.2-45V 2.2A)

This original (md20a) version of our DRV8825 stepper motor driver carrier has been replaced by a&nbs..

$13.99 CAD

Smoothieboard 5xC v1.1

Smoothieboard 5xC v1.1

The Smoothie project is about creating an open source platform for controlling digital fabrication m..

$229.99 CAD

Smoothieboard 4XC v1.1

Smoothieboard 4XC v1.1

* Ships in about a weekThe Smoothie project is about creating an open source platform for controllin..

$179.99 CAD

RAMPS 1.4 Board by Keyestudio

RAMPS 1.4 Board by Keyestudio

It is a Mega Pololu Shield, or RAMPS for short, designed to fit the entire electronics needed for a ..

$24.99 CAD

Tags: Re-ARM, Controller, RAMPS